|
     
| |
CF MESA
PANEL
| The Metl-Span
III CF Mesa, Light Mesa and Partition wall panels are well suited for
interior partition applications. The panels are also ideal for liner panels
inside concrete buildings and make excellent finished ceilings in cold
storage and processing facilities. The lightly corrugated profile on both
faces of the panel ensures symmetry from room to room |
 |
|
Exterior
Profile: Mesa Wave pattern, 1/8 in deep
Interior
Profile: Mesa Wave pattern, 1/8 in deep
Core:
Foamed-in-place, Blister-Free, Non-CFC polyurethane, Factory Mutual Class I
approval.
|
|
 |
|
Module Width: 30 in., 36
in., 42 in.
Panel Thickness: 2 in., 2 1/2 in., 3 in., 4 in., 5 in., 6 in.
Lengths: 8'-0" to
59'-0".
|
|
|
|
Exterior Facings: Stucco embossed G-90 galvanized
steel in 26 ga., 24 ga. and 22 ga. Type 304 stainless steel in 26 ga.
unpainted. |
|
Interior Facings: Stucco embossed G-90 galvanized
steel in 26 ga., 24 ga. and 22 ga. (Note: 22 ga. is not available for the
interior face of the 42 in. module width). Type 304 stainless steel in
26 ga. unpainted. |
|
Finishes: Full strength fluoropolymer PVF2,
siliconized polyester and Polar White 4.0 mil thick PVC plastisol. |
|
Colors: Eight available exterior colors;
Polar White, Regal Gray, Aegean Blue, Sandstone, Desert Beige, Sculpture
Bronze*, Brick Red* and Forest Green*. Interior color and coating is
USDA accepted Polar White siliconized polyester.
*Sculpture Bronze, Brick Red and
Forest Green are not recommended for exterior color on cooler and freezer
buildings. |
|
Joint: Offset double tongue and groove with
extended metal shelf for positive face fastening.
Fastening: Wafer head
fastener and clip concealed in the side joint. |
|
|
|
